Brevin Wood Wall Sconce-Fast Shipping

Description

Brevin Wood Wall Sconce

A solid wood disk — turned and softened at the edges into a low cushion shape — mounts flat to the wall, with a single frosted glass globe set into its center and stepping forward from the disk face. The glass diffuses the bulb behind it into a calm, even sphere of warm light: no hotspot, no glare, no visible filament. The wood is finished in a clear water-based varnish that keeps the natural grain open and visible, so the disk reads as a piece of wood rather than a painted object. Sized at 25 cm overall with an 18 cm globe and a 14 cm projection from the wall, the Brevin works at scale beside a bed, beside a hallway mirror, on a stair landing, or as a paired set down a passage.

At a glance

Solid Wood Disk

Hand-turned from a single block, edges softened into a cushion form — mounts flush against the wall.

Frosted Glass Globe

Diffuses the bulb into a calm, even sphere of light — no hotspot, no visible filament.

Standard E26 Bulb

Takes one E26 medium-base bulb — easy to replace, easy to swap color temperature.

Each disk is one of a kind

The wood is solid, hand-shaped, and hand-finished. Grain pattern, knot placement, and the depth of the natural color all shift block by block. The supplier also notes that overall dimensions can vary by 1–3 cm between pieces, since each disk is measured by hand. Your sconce will share the same character as the photo, but the exact grain and proportions will be unique to your piece.

Hardwired — connects to standard junction box

The Brevin mounts to a standard US wall junction box and wires into your home’s 110–240V supply. We recommend a licensed electrician for installation; estimate 20–30 minutes per fixture for an experienced installer.

Dimensions

Click to enlarge ↗

• Wood disk diameterØ 25 cm / 9.8″
• Glass globe diameterØ 18 cm / 7.1″
• Wall projection14 cm / 5.5″
• Hand-measurement tolerance± 1–3 cm

Detailed scale drawing — coming soon

Bulb

1× E26 medium base

One E26 medium-base bulb, up to 60 W (or LED equivalent). Bulb not included.

Specifications

Installation

• Hardwired install. Mounts to a standard US wall junction box; licensed electrician recommended.
• Turn off power at the breaker before opening the existing junction box. Verify with a voltage tester.
• Connect black to black (line), white to white (neutral), and ground to the green or bare copper wire from the box.
• Secure the wood mounting plate to the junction box with the supplied screws, then attach the lower assembly with the included thumb-screws or twist-lock fitting.
• One E26 bulb, sold separately. Recommended: 2700–3000K warm white LED, 60 W max equivalent.
• For dimming, pair with a dimmable LED bulb on a compatible wall dimmer switch (replace the existing wall switch on the same circuit).
• For indoor use only. Not suitable for bathrooms, outdoor, or other damp locations.

ResourcesRequest via emailSpecificationsRequest via emailInstallationRequest via email3D Files

Frequently asked

Will my sconce look exactly like the photo? Close, not identical. The wood disk is a solid block, hand-turned and hand-finished, so grain pattern, knot placement, and overall color depth shift slightly from piece to piece. The supplier also hand-measures each disk, which means the overall diameter and wall projection can vary by 1–3 cm. Treat the photo as a representative sample of the family — your sconce will share the same overall character but carry its own should I place it? The Brevin works in any spot where soft, indirect light beats overhead lighting. Standard placements: 60–65 cm above a nightstand surface (so the bulb sits roughly at seated head height, not glaring), 150–160 cm above the floor in a hallway (eye level for adults), or as a paired set framing a mirror or piece of artwork. Its 14 cm wall projection means it does sit out from the wall — keep at least 5 cm clearance from corners or door frames so the disk has room to breathe, and avoid placements where you’d brush past it in tight bulb works best, and can I dim it? One E26 medium-base bulb, up to 60 W (or LED equivalent) — choose a warm 2700–3000K bulb to flatter the wood tone and give the frosted glass a natural glow. A19, G16.5, and G25 globe shapes all fit inside the shade, and E27 bulbs work without an adapter. To dim, use a dimmable LED bulb paired with a dimmable wall switch on the same circuit — there’s no built-in dimmer on the fixture I need an electrician to install it? Strongly recommended. The Brevin is hardwired — it connects to a wall junction box and wires into your home’s electrical supply. The job is straightforward for an experienced electrician (20–30 minutes per fixture) but requires turning off the breaker, verifying the line is dead, and making proper line-neutral-ground connections. If you’re not experienced with line-voltage wiring, hire a licensed the Brevin certified for North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.