Description
Pippi Kids Fabric Pendant Light — Handwoven Shade, Colorful Ball Fringe
A hand-woven fabric dome — 450 mm wide and 460 mm tall — hangs from a spray-painted iron ring canopy, its off-white woven body trimmed with a scalloped red fabric border and a row of multicolor felt balls along the bottom edge. The shade diffuses E27 bulb light through the woven weave, casting a soft, scattered glow across the ceiling and walls rather than a direct beam downward. Sized for nurseries, kids’ bedrooms, and playrooms where a pendant in the 14–18-inch range reads comfortably without overpowering a low ceiling.
Key Features
Woven Fabric Shade
Hand-woven cotton fabric body; diffuses light through the weave for scattered ambient glow.
Multicolor Ball Fringe
Felt pom-pom trim at the bottom edge — multicolor, hand-attached, adds playful texture.
Iron Ring Canopy
Spray-painted iron canopy and bottom ring; provides structural shape and ceiling mount point.
Scalloped Red Border
Fabric scallop trim between shade body and ball fringe; adds contrast without sharp edges.
E27 Socket
Standard E27 base; accepts a wide range of available bulb shapes. Bulb not included.
Nursery-Scaled Size
450 mm / 17.7″ wide — sized for kids’ rooms, playrooms, and reading nooks up to ~120 sq ft.
About the Fabric Shade
The woven fabric body is hand-stitched. Minor variation in weave density and felt ball placement is normal for this type of handcraft construction. Do not use steam or an iron on the shade — compressed air or a soft brush removes dust without damaging the fabric.
Color
Multicolor (off-white shade / red border / mixed felt balls)
Dimensions
Single Size
Diameter: 450 mm / 17.7 in
Height (shade only): 460 mm / 18.1 in
Cord length: adjustable at install (standard ceiling canopy hardware)
Canopy: standard iron ceiling mount
Shape Diagram
Click the diagram to enlarge the dimensions.
Single Size Dia 17.7″ × H 18.1″ / 450 × 460 mm
🔍 Click to open full size in a new tab
Bulb
E27 · 1 bulb · Bulb not included
Standard E27 medium base. Because the woven shade diffuses light omnidirectionally, a globe or round bulb shape works well inside the shade; the bulb itself is not visible from below when the shade is hung.
Specifications
| Product Type | Pendant Light |
| Diameter | 450 mm / 17.7 in |
| Height (shade) | 460 mm / 18.1 in |
| Shade Material | Woven fabric |
| Frame / Canopy | Iron, Metal |
| Finish Process | Weaving + spray paint |
| Color | Multicolor — off-white body, red scallop border, mixed felt ball fringe |
| Socket | E27 × 1 |
| Bulb | Not included |
| Wiring | Hardwired |
| Voltage | AC 110–240V |
| Use | Indoor, dry locations only |
| Certification | Compatible with North America, Europe, Saudi Arabia, Australia |
Installation Notes
- Hardwired ceiling installation — a licensed electrician is recommended.
- Compatible with standard wall switch (not included). No integrated dimmer; dimming depends on bulb and switch compatibility.
- E27 socket — twist-lock bulb replacement requires no tools. Bulb not included.
- For indoor, dry locations only. Not suitable for bathrooms, laundry rooms, or covered outdoor areas.
- Cord length is adjustable during installation using the excess cord inside the canopy.
Downloads & Resources
Spec Sheet
FAQ
Does this pendant work in a nursery or toddler room? Yes. At 450 mm / 17.7 inches wide, it fits nurseries and kids’ bedrooms with standard 8-foot ceilings without feeling oversized. The fabric shade has no exposed sharp edges or rigid protruding parts. The bottom ball fringe hangs freely but is attached to the fabric border, not a separate loose kind of bulb should I use, and can I dim this light? The fixture uses a standard E27 base and accepts any E27 bulb up to the bulb’s rated wattage. For a kids’ room, a warm white bulb in the 2700–3000K range keeps the space from feeling clinical. Dimming is possible if you pair a dimmable E27 LED bulb with a compatible wall dimmer switch — the fixture itself has no built-in do I hang it at the right height for a kids’ room? For a general kids’ room pendant (not over a table), the bottom of the shade is typically hung 7 feet from the finished floor as a starting point — this keeps the fixture out of reach for standing children and out of eye-line sightlines. Cord length is adjusted inside the canopy cap during do I clean the fabric shade and felt balls? Use a soft dry brush or compressed air to remove dust from the woven fabric. Do not use water, steam, or a fabric steamer — moisture can distort the woven shape and felt ball texture. The iron ring and canopy can be wiped with a dry this certified for use in North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.






Reviews
There are no reviews yet.