Description
NATURAL TRAVERTINE · ALABASTER INSET · G9 LED · AGED BRASS
A pill-shaped wall sconce that pairs two natural stones — a porous travertine frame with a glowing alabaster inset
Travertine Pill Sconce pairs two distinct natural stones in one architectural composition. A porous, sand-toned travertine outer frame cradles a translucent alabaster inset, accented by two aged-brass orbs. Light passes through the alabaster from within, casting a warm, diffused wash against the wall.
Hardwired and offered in two sizes — Small (14.6″ tall) and Large (19.7″ tall) — the sconce works beautifully mounted vertically beside entryway mirrors, flanking powder-room vanities, or in pairs along a corridor. Ships with a G9 LED pre-installed.
Two Natural Stones
Travertine outer frame with its characteristic porous texture cradles a softly translucent alabaster panel.
Alabaster Glow
The alabaster center diffuses the LED light into a soft, cloud-like panels that eliminates all glare.
G9 LED Included
Ships with a 9W G9 LED in 2700K warm white — replaceable when needed with standard bulbs.
Natural Stone Character. Both travertine and alabaster are natural materials. Pits, voids, and tonal ribbons in the travertine, alongside veining in the alabaster, are characteristic signs of authenticity. No two pieces are identical.G9 LED Support. The included bulb is rated for ~25,000 hours. Replacement is simple: remove the alabaster cover and swap with any standard G9 bulb. For questions, please contact our team.
Bulb
G9 · BI-PIN BASE · PRE-INSTALLED1 × G9 LED · 9W · 2700KA 9W G9 LED in 2700K warm white ships pre-installed. When it eventually needs replacing, any standard G9 LED bulb in the same wattage range will work. Not dimmable as standard.
Two Sizes
Small
W 5.1″ × H 14.6″ (13 × 37 cm)Click to enlarge ↗
Large
W 5.1″ × H 19.7″ (13 × 50 cm)Click to enlarge ↗
Specifications
| Materials | Natural Travertine · Natural Alabaster · Aged Brass |
| Light Source | 1 × G9 LED · 9W · 2700K (Pre-installed) |
| Wattage Equiv. | ~60W Incandescent |
| Rated LED Life | ~25,000 Hours |
| Dimensions | Small: H 14.6″ / Large: H 19.7″ |
| Weight | ~6.6 lb (3 kg) per unit |
| Wiring | Hardwired · Standard Junction Box |
| Voltage | AC 110-240V |
| IP Rating | IP20 (Indoor dry locations only) |
| Certifications | North America · EU · AU · Saudi Arabia |
| Best For | Entryway mirror flanking · Powder-room accent · Hallways |
Installation Notes
- Hardwired installation — licensed electrician recommended.
- Connects to standard junction box; controlled by external wall switch.
- Stone body is substantial (~6.6 lb) — mount into stud or use heavy-duty anchors.
- Designed for vertical orientation; 8.5 ft+ ceiling height recommended for proportion.
- Indoor dry locations only. Not suitable for showers or wet zones.
Downloads
Spec Sheet
Frequently Asked Questions
Is the bulb included?Yes, a 9W G9 LED ships pre-installed. It provides a warm 2700K glow. When it needs replacing, any standard G9 bulb will use two different stones?The travertine outer frame provides grounding texture and architectural weight, while the alabaster center is translucent, allowing the light to pass through and it dimmable?Standard on/off via wall switch. The included G9 bulb is not I install it in a bathroom?Yes, but only in dry zones (IP20 rated). Avoid shower enclosures or areas subject to direct water much does it weigh?It is approximately 6.6 lb (3 kg). Given the natural stone density, we recommend secure mounting to a stud or using appropriate anchors.
Reviews
There are no reviews yet.